1.1 Getting the machine ready to work

1.2 Release the transport safety chains

1.3 Set up working mode

2. Activate the measuring and tamping systems

3. Preparing the machine for tamping work in 09-mode

4. Preparation for tamping work

5. Sleeper-end consolidators and start of tamping

6. Method of operation of the tamping unit and adjustment possibilities

7. Engine start Unimat 09-4x4/4S

8. Preparations for a transfer journey

9. Bring supplementary lift into working position

10. Working with the automatic guiding computer

11. Working with the DRP

12. Preparing to work with the curve laser

13. Preparation for switch processing with laser-controlled supplementary lifting

14. Working with the curve laser

15. Commissioning the machine

16. Work in a switch

17. Taking the machine out of service

18. Sleeper-end consolidators and start of tamping

Part 1:

Machine Overview

Part 2:Cabin Components and Controls

Part 3:

Engine Start up and Shutdown

Part 4:

Traveling the Machine

Part 5:

Setup for Work

Part 6:

Basic Track Geometry

Part 7:

AGGS Measuring

Part 8:

AGGS Basic Solve Steps

Part 9:

Working the Machine

Part 10: Troubleshooting and Maintenance

Part 1:

Machine Overview

Part 2:

Cabin Components and Controls

Part 3: Engine Start Up and Shutdown Procedures

Part 4:

Traveling the Machine

Part 5:

Setup for Work

Part 6:

Working the Machine

Part 7:

Troubleshooting and Maintenance

Part 1:

Machine Overview

Part 2:

Cabin Components and Controls

Part 3: Engine Start Up and Shutdown Procedures

Part 4:

Traveling the Machine

Part 5:

Setup for Work

Part 6:

AGGS Measuring

Part 7:

AGGS Basic Solve Steps

Part 8:

Working the Machine

Part 9:

Diagnostics, Troubleshooting, and Calibration

Part 10:

Daily Inspections and Maintenance